Author Index

A

  • Abdollahy, Mahmoud Removal of impurities from solution containing rare earth elements by precipitation and rare earth elements recovery using ion exchange [Volume 16, Issue 52, 2021, Pages 1-11]
  • Afzal, Peyman An Integer Mathematical Programming Model for Production Scheduling Problem in Open-Pit Mines under Grade Uncertainty and Solving Using the Firefly Algorithm [Volume 16, Issue 52, 2021, Pages 24-40]
  • Aghajani Bazzazi, abbas An Integer Mathematical Programming Model for Production Scheduling Problem in Open-Pit Mines under Grade Uncertainty and Solving Using the Firefly Algorithm [Volume 16, Issue 52, 2021, Pages 24-40]
  • Ahangari, Kaveh Penetration rate analysis for tunnel boring machine in grinding conditions [Volume 16, Issue 52, 2021, Pages 79-88]
  • Akbardoost, Javad MODE I FRACTURE ASSESSMENT OF U-NOTCHED ROCK SPECIMENS USING MTS-FEM CRITERION [Volume 16, Issue 50, 2021, Pages 87-99]
  • Akhbari, Razie Selection and Analysis of an Appropriate Method for Ventilation of Alavi Tunnel, Bandar Abbas [Volume 16, Issue 50, 2021, Pages 73-86]
  • Aliakbarzadeh, Mohammadreza Investigation into the effect of KWB and KB polymeric fibers of Sirjan Nano Yarn on mechanical properties of fine-grained concrete [Volume 16, Issue 50, 2021, Pages 15-26]
  • Asghari, Omid Modelling the Grade and Recovery of Sari Gunay Epithermal Gold with the Application of Geostatistical Algorithms [Volume 16, Issue 50, 2021, Pages 1-13]
  • Ataeepour, M Optimization of Long-Term Production Planning in Sublevel caving Method [Volume 16, Issue 52, 2021, Pages 41-50]
  • Ataeepour, M Prediction of Gas Emission quantity based on gas content uncertainty in coal mines [Volume 16, Issue 51, 2021, Pages 40-51]
  • Ataei, mohammad Numerical simulation of influence parameters on induced stresses distribution during first weighting process of longwall mining [Volume 16, Issue 53, 2022, Pages 1-16]

B

  • BADAKHSHAN, NASER Measurement and control of external dilution in open-pit mines (Case study: Sungun copper mine) [Volume 16, Issue 53, 2022, Pages 51-62]
  • Bahaaddini, Mojtaba Development of a new approach to determine the representative joint set with enhanced reliability [Volume 16, Issue 52, 2021, Pages 63-77]
  • Bahaodini, Mojtaba Investigation into the effect of KWB and KB polymeric fibers of Sirjan Nano Yarn on mechanical properties of fine-grained concrete [Volume 16, Issue 50, 2021, Pages 15-26]
  • Bangian Tabrizi, Amir Hossein An Integer Mathematical Programming Model for Production Scheduling Problem in Open-Pit Mines under Grade Uncertainty and Solving Using the Firefly Algorithm [Volume 16, Issue 52, 2021, Pages 24-40]
  • Bor, Kemeil A proposed up-scaling based micromechanical damage model for brittle rock and its validation in the laboratory scale [Volume 16, Issue 51, 2021, Pages 1-16]

D

  • Darehzereshki, Esmaeil Removal of impurities from solution containing rare earth elements by precipitation and rare earth elements recovery using ion exchange [Volume 16, Issue 52, 2021, Pages 1-11]

E

  • Ebrahim Abadi, Arash Application of Fuzzy AHP in Order to Risk Management of Pre-mature Mine Closure [Volume 16, Issue 52, 2021, Pages 12-24]
  • Eftekhari, Seyed Mosleh Penetration rate analysis for tunnel boring machine in grinding conditions [Volume 16, Issue 52, 2021, Pages 79-88]

G

  • Garmsiri, Mohammadreza Modification of iron ore concentrator circuit to process high sulphur sample utilizing regrinding, Case study: Golegohar concentrator line no. 4 [Volume 16, Issue 51, 2021, Pages 79-86]
  • Geranian, Hamid Identification of geochemical patterns in Khoynaroud mineralization area by correspondence analysis and DENCLUE clustering method [Volume 16, Issue 53, 2022, Pages 32-51]
  • Ghassemzadeh, Hassan Safety risk analysis in Ardestan Dare Ashki and Esfahan Moteh gold mines [Volume 16, Issue 53, 2022, Pages 73-91]
  • Ghobadian, Rasul Prediction of rock mass quality index in the Q-system by multivariate regression using the most influential parameters [Volume 16, Issue 51, 2021, Pages 17-25]
  • Ghorban nejad, Mojtaba Modification of iron ore concentrator circuit to process high sulphur sample utilizing regrinding, Case study: Golegohar concentrator line no. 4 [Volume 16, Issue 51, 2021, Pages 79-86]
  • Golabi, Mohammad Mehdi Modeling of crack initiation and propagation in porous samples due to fluid pressure using Abacus software [Volume 16, Issue 53, 2022, Pages 92-112]

H

  • Hajiazizi, Mohammad Prediction of rock mass quality index in the Q-system by multivariate regression using the most influential parameters [Volume 16, Issue 51, 2021, Pages 17-25]
  • Hasanzadeh, Fereshteh Comparison of zonality indices in position determination of porphyry copper ore in Daralu, south of Kerman province [Volume 16, Issue 52, 2021, Pages 51-62]
  • Hassanpour, Jafar Penetration rate analysis for tunnel boring machine in grinding conditions [Volume 16, Issue 52, 2021, Pages 79-88]

J

  • Jalalifar, Hosein Investigation into the effect of KWB and KB polymeric fibers of Sirjan Nano Yarn on mechanical properties of fine-grained concrete [Volume 16, Issue 50, 2021, Pages 15-26]

K

  • Kakaie, Reza Numerical simulation of influence parameters on induced stresses distribution during first weighting process of longwall mining [Volume 16, Issue 53, 2022, Pages 1-16]
  • Kariminasab, Saeid Investigation into the effect of KWB and KB polymeric fibers of Sirjan Nano Yarn on mechanical properties of fine-grained concrete [Volume 16, Issue 50, 2021, Pages 15-26]
  • Karimpouli, Sadegh Modeling of crack initiation and propagation in porous samples due to fluid pressure using Abacus software [Volume 16, Issue 53, 2022, Pages 92-112]
  • Khodadadi, Ahmad Copper recovery from Gholleh Kaftaran lead mine processing tailings [Volume 16, Issue 50, 2021, Pages 27-38]

L

  • Lajevardi, Seyed Ahmad Modeling of crack initiation and propagation in porous samples due to fluid pressure using Abacus software [Volume 16, Issue 53, 2022, Pages 92-112]

M

  • Madani, Hasan Selection and Analysis of an Appropriate Method for Ventilation of Alavi Tunnel, Bandar Abbas [Volume 16, Issue 50, 2021, Pages 73-86]
  • Madani, Hasan Prediction of Gas Emission quantity based on gas content uncertainty in coal mines [Volume 16, Issue 51, 2021, Pages 40-51]
  • Madani, Hassan Safety risk analysis in Ardestan Dare Ashki and Esfahan Moteh gold mines [Volume 16, Issue 53, 2022, Pages 73-91]
  • Mahdianfar, Hossein Power spectrum– area fractal modeling of data obtained from spectral analysis of U spatial statistics to separate porphyry copper geochemical anomaly areas [Volume 16, Issue 50, 2021, Pages 59-72]
  • Mehrabani Motlagh, Negar Removal of impurities from solution containing rare earth elements by precipitation and rare earth elements recovery using ion exchange [Volume 16, Issue 52, 2021, Pages 1-11]
  • Mirzaei, Mohsen Copper recovery from Gholleh Kaftaran lead mine processing tailings [Volume 16, Issue 50, 2021, Pages 27-38]
  • Mohammadi, Sadjad Numerical simulation of influence parameters on induced stresses distribution during first weighting process of longwall mining [Volume 16, Issue 53, 2022, Pages 1-16]
  • Mohammadnejad, Sima Copper recovery from Gholleh Kaftaran lead mine processing tailings [Volume 16, Issue 50, 2021, Pages 27-38]
  • Moladavoodi, Hamed A proposed up-scaling based micromechanical damage model for brittle rock and its validation in the laboratory scale [Volume 16, Issue 51, 2021, Pages 1-16]
  • Moosavi, Ehsan An Integer Mathematical Programming Model for Production Scheduling Problem in Open-Pit Mines under Grade Uncertainty and Solving Using the Firefly Algorithm [Volume 16, Issue 52, 2021, Pages 24-40]

N

  • Nazari, Seyed Mohammad Hassan An Experimental Study to Examine the Effect of Grouting Superfine Cement Slurry containing Nano-Silica additives in joint with different openings [Volume 16, Issue 53, 2022, Pages 17-31]

P

  • Pourhashemi, Seyed Mahdi Penetration rate analysis for tunnel boring machine in grinding conditions [Volume 16, Issue 52, 2021, Pages 79-88]

R

  • Rabiei Vaziri, Mojtaba Development of a new approach to determine the representative joint set with enhanced reliability [Volume 16, Issue 52, 2021, Pages 63-77]
  • Rahimi, Shokofe Prediction of Gas Emission quantity based on gas content uncertainty in coal mines [Volume 16, Issue 51, 2021, Pages 40-51]
  • Rahimipour, Gholam Reza Comparison of zonality indices in position determination of porphyry copper ore in Daralu, south of Kerman province [Volume 16, Issue 52, 2021, Pages 51-62]
  • Rahmanpour, Mehdi Optimization of Long-Term Production Planning in Sublevel caving Method [Volume 16, Issue 52, 2021, Pages 41-50]

S

  • Sangsefidi, Milad MODE I FRACTURE ASSESSMENT OF U-NOTCHED ROCK SPECIMENS USING MTS-FEM CRITERION [Volume 16, Issue 50, 2021, Pages 87-99]
  • Sepidbar, Sirous Modification of iron ore concentrator circuit to process high sulphur sample utilizing regrinding, Case study: Golegohar concentrator line no. 4 [Volume 16, Issue 51, 2021, Pages 79-86]
  • Sereshki, Farhang Selection and Analysis of an Appropriate Method for Ventilation of Alavi Tunnel, Bandar Abbas [Volume 16, Issue 50, 2021, Pages 73-86]
  • Seyedrahimi-Niaraq, Mirmahdi Power spectrum– area fractal modeling of data obtained from spectral analysis of U spatial statistics to separate porphyry copper geochemical anomaly areas [Volume 16, Issue 50, 2021, Pages 59-72]
  • Shahraki, Mohammad Reza Management and Assessment of Tunnel Construction Projects risks Using Combinatorial Method of the VIKOR and Analytical Hierarchy process [Volume 16, Issue 50, 2021, Pages 39-57]
  • Shahryar, Korosh Measurement and control of external dilution in open-pit mines (Case study: Sungun copper mine) [Volume 16, Issue 53, 2022, Pages 51-62]
  • Shakoor shahabi, reza Application of Fuzzy AHP in Order to Risk Management of Pre-mature Mine Closure [Volume 16, Issue 52, 2021, Pages 12-24]
  • Shakoor Shahabi, Reza Risk reduction of Grade Uncertainty in production scheduling of vein reserves (case study: Taknar copper mines) [Volume 16, Issue 51, 2021, Pages 26-39]
  • Shamsaddini أejad, Mahmoud Comparison of zonality indices in position determination of porphyry copper ore in Daralu, south of Kerman province [Volume 16, Issue 52, 2021, Pages 51-62]
  • Shenavar, Morteza Optimization of Long-Term Production Planning in Sublevel caving Method [Volume 16, Issue 52, 2021, Pages 41-50]
  • Sohrabian, Babak Capacity Assessment of Gumbel-Clayton Copula for Geostatistical Estimation [Volume 16, Issue 51, 2021, Pages 52-67]
  • Soltani, Faraz Removal of impurities from solution containing rare earth elements by precipitation and rare earth elements recovery using ion exchange [Volume 16, Issue 52, 2021, Pages 1-11]

T

  • Taban, MohammadHosein Prediction of rock mass quality index in the Q-system by multivariate regression using the most influential parameters [Volume 16, Issue 51, 2021, Pages 17-25]
  • Tavakoli, Hossein Development of a new approach to determine the representative joint set with enhanced reliability [Volume 16, Issue 52, 2021, Pages 63-77]
  • Tolouei, Kamyar An Integer Mathematical Programming Model for Production Scheduling Problem in Open-Pit Mines under Grade Uncertainty and Solving Using the Firefly Algorithm [Volume 16, Issue 52, 2021, Pages 24-40]
  • Torabi, Ali Reza MODE I FRACTURE ASSESSMENT OF U-NOTCHED ROCK SPECIMENS USING MTS-FEM CRITERION [Volume 16, Issue 50, 2021, Pages 87-99]

V

  • Vahedi nezhad, Neda Management and Assessment of Tunnel Construction Projects risks Using Combinatorial Method of the VIKOR and Analytical Hierarchy process [Volume 16, Issue 50, 2021, Pages 39-57]

Z

  • Zolfaghari, Mehdi A proposed up-scaling based micromechanical damage model for brittle rock and its validation in the laboratory scale [Volume 16, Issue 51, 2021, Pages 1-16]